Graphite resources are focused in recent years with the fast development of the refractory material and new energy vehicles . There are two different type graphite: Artificial graphite and Natural graphite. Every graphite mine has unique characteristics which need to be determined in advance. Therefore, it is of crucial importance to determine graphite flake morphology, primary flake size and liberation size.
Typical flake graphite deposits are gneissic and consist mainly of feldspar, quartz and mica. The size of the graphite flake is a very important fact under commercial consideration. Therefore, it is in the best interest of a flake graphite producer to maximize the amount of large flake. Limult is experienced in choosing the suitable grinding mill to reserve high yield rate of big flake graphite.
Thermal Purification And Chemical Purification:
Graphite purification furnace is used for continuous high temperature purification of graphite powder to match increasingly stricter environmental protection requirements. We have continuous type and pusher type for different purpose purification process. It is continuous loading and discharging under high temperature reducing the energy consumption and shortening the production cycle. The furnace adopts electrical resistant or induction heating that the temperature can reach up to more than 2600°C. Most of the impurities become gas, but the graphite will remain because of its heat resisting property. Both high temperature and chemical method can be used to satisfy the high purity requirement. The furnace uses high efficiency filter system, which can trap the dust and corrosive gases coming from the purification process.
Graphite used for high tech products such as Lithium ion batteries or fuel cells demands higher purity than typically upgraded by flotation. The chemical purification technology should be considered for further purification of graphite concentrate to TGC 99.99%. A basic process is thermal treatment in the presence of caustic reagents to dissolve siliceous impurities such as quartz, feldspar or mica. The graphite concentrate is mixed with caustic reagent and calcined at elevated temperatures. After calcination the graphite is leached with water washing away dissolved impurities. In order to get ultra-high purity graphite, the fine intergrown minerals residing between the graphite layers have to be removed. Thus, one or multi-stage acid washing with different acids or combinations is applied to remove impurities that are insoluble at alkaline conditions.
Contact us at +2347052446249 for more information on our redefining industry development services or visit our store at www.limult.com/shop to see more products that we make available.